| |
| CONTACT US |
| |
|
| |
Wuxi Operation
Add: Huayi South Road, Wuxi New District, China Zip:214131
Tel:+86 0510-85601098
Fax:+86 0510-85615159
http://www.zkflow.com |
| Shanghai Office |
Add:No.2201 Room,2nd Building Tianshan Commercial Building,No.789 Tianshan Road, Changning, Shanghai . Zip:200051
Tel:+86 021-62269589
Fax:+86 021-62269289
E-mail: sales@zkflow.com |
|
|
| Products and services
>>Pump services
>>Consulting and diagnosis services
|
| |
| Consulting and diagnosis services | Forecast your operating costs,optimize your maintenance costs,provide the optimal maintenance solution. 1.Root problem analysis
It is always difficult for the end user to find the root cause when the pump doesn't work well.
We are your ideal partner, we can help analysis the root cause of the poorly performing pumps and the systems.
Measure on site
We need to measure the running data on site, these data may be momentary or constant.
During a typical site inspection, we
--Confirm pump duty during normal operation and under process upset conditions (flow, head, speed, balance, line flows, etc.)
--Record vibration parameters (both absolute and relative
figures)
--Collect data during the start-up and shutdown phases
--Temperature measurement (bearings, cooling systems, seal flushes, etc.)
--Check mechanical seals for leaks
--Review operation of minimum flow valve or other control devices
--Check for other external leaks and abnormal noises
Analysis and recommendations
Measurements are analyzed by our engineers, who prepare detailed reports covering the following:
· Comparison of current operating conditions to the original design criteria
· Estimation of recirculation losses of balance system wear (where applicable)
· Recommendations for any changes in general operation (e.g. temperature limits)
· Recommendations to existing maintenance regimes
· Recommendations for any system or process changes
· Recommendations for stocking critical spare parts
· Proposal for pump modifications if applicable
Your key benefits are:
· Knowledge of current pump condition without the need for a shutdown
· Potential to extend pump operating time between scheduled maintenance periods
· Recommendations for system and process optimization
· · Optimized spare parts stocking
Potential to upgrade the pump with latest technology and materials
· Direct and indirect cost savings
2.Operation and Maintenance Training
Trained staff with the requisite skills will improve safety and standardized work practices, while reducing your maintenance costs over the lifetime of the equipment.
Systems and Operations Training:
· Physical principles
· Systems
· Pump types
· Components
· Drive systems
· Testing
· Materials and corrosion
· Condition monitoring
Maintenance Training:
-General overview of pump types
-Construction features
-Installation procedures
-Coupling considerations
-Pump dismantling
-Pump component inspection and assessment
-Pump assembly
-Seal arrangements and principles
-Commissioning and start-up procedures
-Routine maintenance
-Potential failures, causes, effects and solutions |
Next Page：Maintenance and repair services |   |
|
|
Language:
Back to top